-
Drangmeister, Jannis;
Kästner, Markus;
Reithmeier, Eduard
(2024):
Projektionseigenschaften von Bildleitern bei der endoskopischen Streifenprojektion,
125. Jahrestagung der DGaO, DGaO-Proceedings 2024, Aachen
http://www.dgao-proceedings.de
ISSN:
1614-8436 – urn:nbn:de:0287-2024-A027-2
-
Shobowale, Peter;
Kästner, Markus;
Reithmeier, Eduard
(2024):
Skalenübergreifende Streifenprojektion mittels Adaption der Triangulationsbasis,
125. Jahrestagung der DGaO, DGaO-Proceedings 2024, Aachen,
http://www.dgao-proceedings.de
ISSN:
1614-8436 – urn:nbn:de:0287-2024-A024-9
-
Thiel, Theresa;
Kästner, Markus;
Reithmeier, Eduard
(2024):
Entwicklung eines starr-endoskopischen 3D-Streifenprojektionssensors zur automatisierten Flugtriebwerksinspektion,
125. Jahrestagung der DGaO, DGaO-Proceedings 2024, Aachen,
http://www.dgao-proceedings.de
ISSN:
1614-8436 – urn:nbn:de:0287-2024-A026-8
-
Bossemeyer, H.;
Kästner, M.;
Reithmeier, E.
(2023):
An extended model for the kinematic identification of a tiltable laser plane in adaptive light-section triangulation,
SPIE Optical Metrology, 2023, Munich, Germany,
Proceedings Volume 12618, Optical Measurement Systems for Industrial Inspection XIII; 126181T (2023)
DOI:
10.1117/12.2673846
-
Bossemeyer, H.; Kästner, M.; Reithmeier, E.
(2023):
Identifikation der Hand-Auge-Korrespondenz durch Pose-Graph-basierte Referenzposenoptimierung,
124. Jahrestagung der DGaO, DGaO-Proceedings 2023
ISSN:
1614-8436
-
Hagen, P.-F.;
Kästner, M.;
Reithmeier, E.
(2023):
Kalibrierung eines multimodalen Messsystems zur Inline-Deformationsanalyse an Kautschukextrudern,
124. Jahrestagung der DGaO, Berlin, DGaO-Proceedings 2023
ISSN:
1614-8436
-
Kern, P.;
Hinz, L.;
Kästner, M.;
Reithmeier, E.
(2023):
Identification and Correction of Magnification Factor Deviations of a Telecentric Fringe Projection System,
Proc. SPIE 12618, Optical Measurement Systems for Industrial Inspection XIII, 126180I (15 August 2023), SPIE Optical Metrology, München
DOI:
10.1117/12.2673617
-
Kern, P.; Middendorf, P.; Hinz, L.; Kästner, M.; Reithmeier, E.
(2023):
Kalibrierung eines multiskaligen telezentrischen Streifenprojektionssensors,
124. Jahrestagung der DGaO vom 31.05. - 03.06.2023, Berlin;
http://www.dgao-proceedings.de; https://www.dgao-proceedings.de/download/124/124_a24.pdf
ISSN:
1614-8436
-
Siemens, S.
Kästner, M.
Reithmeier, E.
(2023):
Non-Overlap Image Registration,
SMSI - Sensor and Measurement Science International 2023, 2023-05-08 - 2023-05-11, Nürnberg
DOI:
10.5162/SMSI2023/P01
ISBN:
978-3-9819376-8-8
-
Siemens, S.;
Kästner, M.;
Reithmeier, E.
(2023):
Noise-robust registration of microscopic height data using convolutional neural networks,
Proceedings Volume 12327, SPIE Future Sensing Technologies 2023
DOI:
10.1117/12.2644620
-
Siemens, S.;
Kästner, M.;
Reithmeier, E.
(2023):
Synthetically generated microscope images of microtopographies using stable diffusion,
SPIE Optical Metrology, 2023, Munich, Germany,
Proceedings Volume 12623, Automated Visual Inspection and Machine Vision V; 1262309 (2023)
DOI:
10.1117/12.2673643
-
Middendorf, P; Rothgänger, M.; Peddinghaus, J.; Brunotte, K.; Uhe, J.; Behrens, B.A.; Quentin, L.; Kästner, M.; Reithmeier, E.
(2022):
In Situ Wear Measurement of Hot Forging Dies Using Robot Aided Endoscopic Fringe Projection,
Key Engineering Materials
DOI:
10.4028/p-k81788
-
Bossemeyer, H.; Ahlborn, P.; Kästner, M.; Reithmeier, E.
(2021):
Model-based adaptive estimation of camera matrices for variable-focus optical
metrology applications,
122. Jahrestagung der DGaO, DGaO Proceedings 2021
ISSN:
1614-8436
-
Bossemeyer, H.; Kästner, M.; Reithmeier, E.
(2021):
Robust and sub-pixel accurate wavelet-based segmentation of laser lines formed by lenticular lenses,
SPIE Optical Metrology, 2021, Online Only, Proceedings Volume 11782, Optical Measurement Systems for Industrial Inspection XII; 1178218
DOI:
https://doi.org/10.1117/12.2592657
-
Hedrich, K.;
Kästner, M.;
Middendorf, P.;
Reithmeier, E.
(2021):
Miniaturization of borescopic fringe projection systems for the inspection in confined spaces: a methodical analysis,
SPIE OPTO, 2021
DOI:
https://doi.org/10.1117/12.2583148
-
Lennart Hinz, Markus Kästner and Eduard Reithmeier
(2021):
Impact of multireflections on measurement accuracy in the endoscopic 3D reconstruction of gearing geometries,
SPIE Optical Metrology: Optical Measurement Systems for Industrial Inspection XII
| File |
DOI:
10.1117/12.2592599
-
Lennart Hinz, Markus Kästner and Eduard Reithmeier
(2021):
Adaptive camera calibration for a focus adjustable liquid lens in fiber optic endoscopy,
SPIE Optics + Optoelectronics, Nonlinear Optics and Applications XII
| File |
DOI:
10.1117/12.2592653
-
Lennart Hinz, Markus Kästner, Eduard Reithmeier
(2021):
Improved defect segmentation by combining fiber optic fringe projection profilometry with directional variable brightfield illumination,
SPIE OPTO, 2021; Proceedings Volume 11698, Emerging Digital Micromirror Device Based Systems and Applications XIII
DOI:
10.1117/12.2578564
-
Middendorf, P.; Kern, P.; Melchert, N.; Kästner, M.; Reithmeier, E.
(2021):
A GPU-based ray tracing approach for the prediction of multireflections on measurement objects and the a priori estimation of low-reflection measurement poses,
SPIE Optical Metrology, 2021
DOI:
https://doi.org/10.1117/12.2592565
-
Beermann, R.; Bossemeyer, H.; Diekmann, R.; Kästner, M.; Reithmeier, E.
(2020):
Model-based calibration routine for a triangulation sensor for inner radius measurements of cylindrical components,
SPIE Photonics Europe 23. March - 02. April 2020, Strasbourg, France
DOI:
10.1117/12.2552729
-
Beermann, R.; Quentin, L.; Kästner, M.; Reithmeier, E.
(2020):
Affine structured light sensor for measurements through inspection windows: basic concept and direct calibration approach,
SPIE Photonics Europe 23. March - 02. April 2020, Strasbourg, France
DOI:
10.1117/12.2556081
-
Betker, T.; Kästner, M.; Reithmeier, E.
(2020):
3D registration of multiple surface measurements using projected random patterns,
SPIE Photonics Europe 23. March - 02. April 2020, Strasbourg, France (accepted, not published yet)
-
Hinz, L.; Kästner, M.; Reithmeier, E.
(2020):
Adaptive merging of large datasets of a 3D measuring endoscope in an industrial environment,
SPIE Photonics Europe 23. March - 02. April 2020, Strasbourg, France
| File |
DOI:
10.1117/12.2553939
-
Lennart Hinz, Robert Schulte, Markus Kästner, Eduard Reithmeier
(2020):
High-Resolution Inspection of Tools for Novel Forming Processes by an Endoscopic Fringe Projection System,
Conference: 3D Image Acquisition and Display: Technology, Perception and Applications
DOI:
10.1364/3D.2020.DF3A.4
-
Melchert, N.; Kästner, M.; Reithmeier, E.
(2020):
Robot-assisted BRDF measurement and surface characterization of inhomogeneous freeform shapes,
SPIE Photonics Europe 23. March - 02. April 2020, Strasbourg, France
DOI:
10.1117/12.2555808
-
Middendorf, P.; Kästner, M.; Reithmeier, E.
(2020):
Integration of an endoscopic fringe projection system into a milling machine for the regeneration of complex capital goods: a first prototype,
SPIE Photonics Europe 2020
DOI:
10.1117/12.2555767
-
Quentin, L.; Beermann, R.; Brunotte, K.; Behrens, B.-A.; Kästner, M.; Reithmeier, E.
(2020):
Concept of a control system based on 3D geometry measurement for open die forging of large-scale components,
SPIE Photonics Europe
DOI:
https://doi.org/10.1117/12.2554720
-
Siemens, S.;
Kästner, M.;
Reithmeier, E.
(2020):
Super-resolution for 2.5D height data of microstructured surfaces using the vdsr network,
European Optical Society Biennial Meeting (EOSAM) 2020
DOI:
10.1051/epjconf/202023806014
-
Beermann, R.; Quentin, L.; Kästner, M.; Reithmeier, E.
(2019):
Structured light sensor with telecentric stereo camera pair for measurements through vacuum windows,
SPIE Optical Metrology 24.-27. June 2019, Munich, Germany
DOI:
10.1117/12.2526049
-
Quentin, L.; Kruse, J.; Beermann, R.; Reinke, C.; Langner, J.; Stonis, M.; Kästner, M.; Reithmeier, E.
(2019):
Analysis of Mapped Temperature Data on Geometry Points to Characterise the Influence of Temperature Deviations on Cross-Wedge Rolling,
ESAFORM, AIP Conference Proceedings, vol. 2113, nr.1, pages 040018 (2019)
DOI:
10.1063/1.5112552
-
Beermann, R.; Quentin, L.; Reithmeier, E.; Kästner, M.
(2018):
2D refractive index field measurements in air in different pressure scenarios ,
In: Proceedings of SPIE 10819, SPIE Photonics 11. – 13. October 2018, Beijing, China, pp. 108190E-1 - 108190E-8.
DOI:
10.1117/12.2500315
-
Beermann, R.; Quentin, L.; Kästner, M.; Pösch, A.; Reithmeier E.
(2017):
Simulation of Light Deflection Due to an Inhomogeneous Refractive Index Field Induced by a Hot Measurement Object,
In: Proceedings of the 118th Annual Meeting of DGaO, DGaO 06. - 10. Juni 2017, Dresden, Deutschland, A20-9, ISSN: 1614-8436, https://www.dgao-proceedings.de/download/118/118_a20.pdf
-
Beermann, R.; Quentin, L.; Pösch, A.; Reithmeier, E.; Kästner, M.
(2017):
Light section measurement to quantify the accuracy loss induced by laser light deflection in an inhomogeneous refractive index field
,
In: Proceedings of SPIE 10329, SPIE Optical Metrology 25. - 29. June 2017, Munich, Germany, pp. 103292T-1-103292T-7.
DOI:
10.1117/12.2269724
-
Diaz, M.R.; Mohwald, K.; Loftfield, N.; Kastner, M.; Reithmeier, E.; Knigge, S.; Glasmacher, B.; Maier, H.J.
(2017):
Transpiring thermally sprayed alumina layers with integrated fluid flow tubes,
Proceedings of the International Thermal Spray Conference
-
Gorschenew, W.; Kästner, M.; Reithmeier, E.
(2017):
Flexible registration method for light-stripe sensors considering sensor misalignments,
Optical Measurement Systems for Industrial Inspection X, Proc. of SPIE Vol. 10329, Hrsg.: Lehmann P.; Osten, W.; Gonçalves Jr., A.A.
| File |
DOI:
10.1117/12.2269986
-
Jochen Schlobohm, Oliver Bruchwald, Wojciech Frąckowiak, Yinan Li, Markus Kästner, Andreas Pösch, Wilfried Reimche, Hans Jürgen Maier, Eduard Reithmeier
(2017):
Advanced characterization techniques for turbine blade wear and damage,
Procedia CIRP
| File |
DOI:
10.1016/j.procir.2016.09.005
ISBN:
2212-8271
-
Loftfield, N.; Kästner, M.; Reithmeier, E.
(2017):
3D registration of depth data of porous surface coatings based on 3D phase correlation and the trimmed ICP algorithm,
Proc. SPIE 10333, Optical Methods for Inspection, Characterization, and Imaging of Biomaterials III
DOI:
10.1117/12.2269781
-
Loftfield, N.; Kästner, M; Reithmeier, E.
(2017):
Nonlinear anisotropic diffusion filtering for the characterization of stochastic structured surfaces,
Proceedings | The Joint IMEKO 2017 TC1 – TC7 – TC13 Symposium 2017 von 31. July bis 3. August in Rio de Janeiro
-
Loftfield, N.; Kästner, M; Reithmeier, E.
(2017):
3D reconstruction and characterization of the porous microstructure of Al2O3-coatings based on surface data,
Engineering for a Changing World: Proceedings; 59th IWK, Ilmenau Scientific Colloquium, Technische Universität Ilmenau, Vol. 59, 2017, H. 1.1.10 (20.10.2017)
-
Quentin, L.; Beermann, R.; Pösch, A.; Reithmeier, E.; Kästner, M.
(2017):
3D geometry measurement of hot cylindric specimen using structured light,
In: Proceedings of SPIE 10329, SPIE Optical Metrology 25. – 29. June 2017, Munich, Germany, pp. 103290U-1-103290U-6.
DOI:
10.1117/12.2269607
-
Li, Y.; Bossemeyer, H.; Kästner, M.; Reithmeier, E.
(2016):
Development of an edge sensor based on polyview optics and laser triangulation principle,
SPIE/COS Photonics Asia, 2016, Beijing, China, Proceedings Volume 10023, Optical Metrology and Inspection for Industrial Applications IV; 100231E
DOI:
https://doi.org/10.1117/12.2247007
-
Li,Y.; Bossmeyer, H.; Kästner, M.; Reithmeier, E.
(2016):
Development of an edge sensor based on polyview optics and laser triangulation principle,
In SPIE/COS Photonics Asia (pp. 100231E-100231E). International Society for Optics and Photonics 2016.
DOI:
doi:10.1117/12.2247007
-
Li,Y.; Kästner, M.; Reithmeier, E.
(2016):
Edge measurement based on multi laser triangulation sensors,
117. Jahrestagung der DGaO vom 17. bis 21. Mai 2016 in Hannover
-
Loftfield, N.; Kästner, M.; Reithmeier, E.
(2016):
The impact of different data filters on the characterization of porous surfaces,
117. Jahrestagung der DGaO vom 17. bis 21. Mai 2016 in Hannover
| File |
-
Zou, Y.; Kästner, M.; Reithmeier, E.
(2016):
Wear Process Monitoring of thermal spray coatings and surface topography analysis using a confocal laser scanning microscopy,
117. Jahrestagung der DGaO vom 17. bis 21. Mai 2016 in Hannover
-
Li, Y., Kästner, M., & Reithmeier, E.
(2015):
Development of a compact low coherence interferometer based on GPGPU for fast microscopic surface measurement on turbine blades,
SPIE Optical Metrology 2015, Proc. SPIE 9525, Optical Measurement Systems for Industrial Inspection IX, 95250R (pp. 95250R-95250R), Munich
DOI:
10.1117/12.2184749
-
Li, Y., Kästner, M., Reithmeier, E.
(2015):
Compact Optical Sensor for the Measurement of Surface Microtopographies on Turbine Blades,
AMA Conference 2015, Proceedings SENSOR 2015, Nürnberg, Germany
DOI:
10.5162/sensor2015/C6.3
ISBN:
978-3-9813484-8-4
-
Matthias, S.; Kästner, M.; Reithmeier, E.; Sieczkarek, P.; Tekkaya, A.
(2015):
Forming tool inspection using fiber-optic sensor heads,
VipImage 2015
-
Matthias, S.; Schlobohm, J.; Kästner, M.; Reithmeier, E
(2015):
Gegenüberstellung zweier Messsysteme zur Geometrieerfassung mittels strukturierter Beleuchtung,
7. VDI-Fachtagung Messunsicherheit 2015
-
Engelke, F., Kästner, M., Reithmeier, E.
(2014):
Vergleichbarkeitsuntersuchung von optischen und taktilen Messgeräten bezüglich der ISO 25178,
Deutsche Gesellschaft für angewandte Optik, 115. Jahrestagung
-
Jochen Schlobohm, Andreas Pösch, Markus Kästner, Eduard Reithmeier
(2014):
On the development of a low-cost rigid borescopic fringe
projection system,
Proc. of SPIE Vol. 9450
| File |
DOI:
10.1117/12.2067310
-
Jochen Schlobohm, Yinan Li, Andreas Pösch, Benjamin Langmann, Markus Kästner, Eduard Reithmeier
(2014):
Multiscale Optical Inspection Systems for the Regeneration of Complex
Capital Goods,
Procedia CIRP 22
| File |
DOI:
10.1016/j.procir.2014.07.019
-
Matthias, S.; Kästner, M.; Reithmeier, E.
(2014):
Camera and projector calibration of an endoscopic fringe projection system.,
Proceedings of 11th IMEKO Symposium LMPMI2014 (Laser Metrology for Precision Measurement and Inspection in Industry) ISBN 978-92-990075
-
Pösch, A.; Kästner, M.; Reithmeier, E.
(2014):
Fringe projection measurement of highly specular objects in presence of multi-reflection,
Computation Vision and Medical Image Processing IV, ISBN 978-1-138-00081-0
-
Reithmeier, E.; Kästner, M.; Matthias, S.; Schlobohm, J.
(2014):
Endoskopische 3D-Messtechnik,
DGaO 115. Jahrestagung
-
Yibo Zou, Markus Kästner, Eduard Reithmeier
(2014):
Characterization of porous surfaces with spatial point pattern analysis,
SPIE Photonics Prague 2014
| File |
-
Yibo Zou, Markus Kästner, Eduard Reithmeier
(2014):
Multiskalenmethode zur dimensionellen Charakterisierung von porösen Oberflächen ,
DGaO 115. Jahrestagung
| File |
-
Christoph Ohrt, Andreas Pösch, Dr. Markus Kästner, Prof. Eduard Reithmeier
(2013):
One Image Fibrescopic Finge Projection with Inverse Approach,
11th International Symposium on Measurement and Quality Control 2013, September 11-13, 2013, Cracow-Kielce, Poland
-
Christoph Ohrt, Andreas Pösch, Markus Kästner, Eduard Reithmeier
(2013):
Potentials of Endoscopic Fringe Projection - A Differetiation of Measuring Video-, Fiber- and Borescopy,
Fringe 2013, 7th International Workshop on Advanced Optical Imaging and Metrology, ISBN 978-3-642-36358-0, DOI: 10.1007/978-3-642-36359-7_135
-
Engelke, F., Kästner, M., Reithmeier, E.
(2013):
Measurement based simulation of microscope deviations for evaluation of stitching algorithms for the extension of Fourier-based alignment,
SPIE Optical Metrology 2013. International Society for Optics and Photonics, 2013
| File |
-
Engelke, F., Kästner, M., Reithmeier, E.
(2013):
3D - Reconstruction of Microstructures on Cylinder Liners,
Proc. 13th Int. Conf. of the EUSPEN, 2013, S. 132-135
| File |
-
Engelke, F., Kästner, M., Reithmeier, E.
(2013):
Verbessertes Stitching von 3D-Mikroskopiedaten auf Grundlage von Simulationsergebnissen,
Deutsche Gesellschaft für angewandte Optik, 114. Jahrestagung
-
Kästner, M.; Hausotte, T.; Reithmeier, E.; Loderer, A.; Ohrt, C.; Sieczkarek, P.
(2013):
Fertigungsnahe Qualitätskontrolle von Werkzeug und Werkstück,
2. Workshop Blechmassivumformung, 2(2013)1, Meisenbach GmbH Verlag, S. 101-119
-
Krauß, M.; Kästner, M., Reithmeier, E.
(2013):
Data quality estimation from interdependencies for structural light scanners,
Computational Vision and Medical Image Processing:
Vip Image 2013
ISBN: 978113800081
-
Ohrt C., Kästner M., Reithmeier E.
(2013):
Fibrescopic Micro Fringe Projection,
Metromeet 2013 - 9th International Conference
on Industrial Dimensional Metrology (Invited Talk)
-
Ohrt, C.; Kästner, M.; Reithmeier, E.
(2013):
Fiberskopische Geometriemessung auf Basis der Streifenprojektion,
114. JAHRESTAGUNG VOM 21. BIS 25. MAI 2013 IN BRAUNSCHWEIG
-
Ohrt, C.; Kästner, M.; Reithmeier, E.
(2013):
High resolution measurements of filigree, inner geometries with endoscopic micro fringe projection,
SPIE Optical Metrology 2013, München, S. 878817-1 doi: 10.1117/12.2020440
-
Pösch, A.; Kästner, M.; Reithmeier, E.
(2013):
Fringe projection measurement of highly specular objects in presence of multi-reflection,
VIP Image, Funchal
-
Krauß, M., Kästner, M., Reithmeier, E
(2012):
Evaluation of Worn Surfaces Using Directional Illumination,
Optimess 2012, Antwerpen
-
Krauß, M., Kästner, M., Reithmeier, E.
(2012):
Multi-Scale Inspection of Worn Surfaces for Product Regeneration,
CMSC 2012, New Orleans
-
Ohrt C., Kästner M., Reithmeier E.
(2012):
A device for endoscopic measurements of forming tools with filigree side elements,
Optimess 2012 Antwerpen
-
Ohrt, C.; Hartmann, W.; Weickmann, J.; Kästner, M.; Weckenmann, A.; Hausotte, T.; Reithmeier, E.
(2012):
Holistic measurement in the sheet-bulk metal forming process with fringe projection,
Procceedings ESAFORM 15th ESAFORM conference (March, 14th - 16th,2012) pp 1005-1010
-
Ohrt, C.; Kästner, M.; Reithmeier E.
(2012):
Fast Endoscopic Geometry Measurement with Fibre Based Fringe Projection for Inner Geometries,
CMSC 2012
-
Reithmeier E., Ohrt C., Kästner M.
(2012):
Fast Endoscopic Geometry Measurement of Sheet-Bulk Metal Formed Parts,
CIRP January Meeting 2012
-
Denkena, B.; Gümmer, O.; Gillhaus, R.; Kästner, M.; Reithmeier, E.
(2011):
Precise Alignment of Precision Forged Crankshafts in a Grinding Machine,
Proceedings of the euspen 11th International Conference, Vol. 2, pp. 418–421, 2011
| File |
-
Haskamp, K.; Kästner, M.; Reithmeier, E.
(2011):
Fast Virtual Shadow Projection as Part of a Virtual Multisensor Assistance System,
SPIE Optical Metrology 2011, München, S. 80830G
| File |
-
Haskamp, K.; Kästner, M.; Reithmeier, E.
(2011):
Accurate Calibration of a Fringe Projection System by Considering Telecentricity,
SPIE Optical Metrology 2011, München, S. 80821B
| File |
-
Ohrt C., Kästner M., Reithmeier E.
(2011):
Adaption of beamshaping techniques for a new kind of laser ilummination of micro fringe projection systems,
10 th IMEKO Symposium Laser Metrology for Precision Measurement and Inspection in Industry (LMPMI) 2011 VDI-Berichte 2156, S. 177-184
-
Ohrt, C.; Gillhaus, R.; Haskamp, K.; Kästner, M.; Reithmeier E.
(2011):
Endoskopische Laserstreifenprojektion ,
Kaiser Friedrich Forschungspreis 2011 InnovationsForum Optische Sensorik 10. Mai 2011 Kaiserpfalz/Goslar S.85-86
-
Ohrt, C.; Kästner, M.; Reithmeier, E.
(2011):
Endoscopic geometry inspection by modular fiber-optic sensors with increased depth of focus,
SPIE Optical Metrology 2011, München, S. 808215
| File |
-
Reithmeier E., Weckenmann A., Behrens B.-A., Ohrt C., Kästner M., Akkasoglu G., Cahyono T., Hübner S., Krimm R., Salfeld V., Voges-Schwieger K., Vucetic M.
(2011):
Qualitätsorientierte Entwicklung der Blechmassivumformung,
1. Workshop Blechmassivumformung Tagungsband, Erlangen, 13. Oktober 2011, S. 97 - 118, ISBN 978-3-87525-321-4
-
Weckenmann A., Behrens B., Reithmeier E., Akkasoglu G., Vucetic M., Ohrt C., Cahyono T., Hübner S., Kästner M.
(2011):
Appliance of the maturity method in the develpoment of endoscopic geometry inspection for sheet bulk metal forming tools,
CIRP "Total Quality Management-Advanced and Intelligent Approaches" 2011, Belgrad, 6. - 10. Juni 2011,S. 1-8 ISBN: 978-86-7083-727-0
-
Abo-Namous, O.; Kästner, M.; Reithmeier, E.; Nicolaus, M.; Möhwald, K.; Bach, F.-W.
(2010):
Mechanical Surface Treatment to Obtain Optically Cooperative Surfaces vis-à-vis Fringe Projection,
Reflection, Scattering, and Diffraction from Surfaces II, Proc. of SPIE Vol. 7792, 7792OV-1
| File |
-
Bach, F.-W.; Möhwald, K.; Nicolaus, M.; Reithmeier, E.; Kästner, M.; Abo-Namous, O.
(2010):
Non-Contact Geometry Inspection of Workpieces with Optically Non-Cooperative Surfaces,
Key Engineering Materials Vol. 438 (2010) pp. 123-129
| File |
-
Bretschneider, M.; Kästner, M.; Reithmeier, E.
(2010):
Preprocessing of 3D Measurement Data of Microstructures with Large Lateral Dimensions,
Focus on Microscopy 2010; Shanghai, China, p. 155
| File |
-
Bretschneider, M.; Krauß, M.; Kästner, M.; Reithmeier E.
(2010):
3D Measurements of Microstructures with Large Lateral Dimensions,
Proceedings of the 10th International Symposium on Measurement and Quality Control, Osaka, Japan, September 5-9, 2010
| File |
-
Carrasco, J.; Hao, Q.; Kästner, M.; Reithmeier, E.
(2010):
Measurement of Al–Si Cylinder Liners Using White-light Interferometry and Image Processing on a Coordinate Measuring Machine,
51. Tribologie-Fachtagung, GfT, 2010, Göttigen, pp. 81/1-81/13
| File |
-
Gillhaus, R.; Pahlke, A.; Kästner, M.; Reithmeier, E.
(2010):
Messunsicherheitsbetrachtung optischer Abstandssensoren basierend auf der konoskopischen Holographie,
Sensoren und Messsysteme 2010, 18-19.05.2010 Nürnberg, S. 345-352, 2010.
| File |
-
Haskamp, K.; Kästner, M.; Reithmeier, E.
(2010):
Virtuelle Messgeräte als Tool zur Abschätzung von Messunsicherheiten,
Vierter Workshop Optische Technologien, S. 292-300, Hannover, 17.11. - 18.11.2010
| File |
-
Leis, A.; Kästner, M.; Reithmeier, E.
(2010):
Oberflächenschadenskontrolle mit dem Streulichtsensor,
Tagungsband des dritten Workshops für Optische Technologien, S. 202-208
| File |
-
Nicolaus, M.; Möhwald, K.; Bach, Fr.-W.; Abo-Namous, O.; Kästner, M.; Reithmeier, E.
(2010):
Berührungslose Geometrieprüfung endbearbeiteter Bauteile mit optisch nicht kooperativen Oberflächen,
Tagungsband zum 13. Werkstofftechnischen Kolloquium in Chemnitz, Bd. 37, S. 313-317
-
Ohrt, C.; Krauß, M.; Kästner, M.; Reithmeier, E.
(2010):
Optimierung eines endoskopischen Streifenprojektionssystems,
Vierter Workshop Optische Technologien Tagungsband
-
Pahlke, A.; Kästner, M.; Reithmeier, E.
(2010):
Fast In-Line Quality Assurance of Gearwheels,
4th CTI Symposium & Exhibition Automotive Transmission and Drive Trains Proceedings, 8.-9. Juni, Ann Arbor, Michigan, USA, Paper: C9
| File |
-
Pahlke, A.; Kästner, M.; Reithmeier, E.
(2010):
Fast Algorithms for In-Line Gearwheel Measurements,
10th International Symposium on Measurement and Quality Control 2010, September 5-9, Osaka, Japan, pp. B2-005-1 - B2-005-4
| File |
-
Pahlke, A.; Kästner, M.; Reithmeier, E.
(2010):
New Technology for In-Line Quality Improvement of Gearwheels,
VDI International Conference on Gears. Proceedings, 4.-6. Oktober 2010, München, S. 479 – 486
| File |
-
Pösch A., Vynnyk T., Kästner M., Abo-Namous O., Reithmeier E.
(2010):
Virtual Inverse Fringe Projection,
CMSC Conference, Reno
-
Abo-Namous, O.; Kästner, M.; Reithmeier, E.
(2009):
Interior Geometry Inspection Using Rerouted Fringe Projection,
Fringe09, Nürtingen, 13.-16. September 2009, pp. 709 - 712
-
Bretschneider, M.; Kästner, M.; Reithmeier, E.
(2009):
Measurement and Characterisation of Microstructures made by Cutting Processes,
Proceedings of the euspen 9th International Conference, San Sebastian, 02.-05. June 2009, Volume 2, pp. 223 - 226
| File |
-
Bretschneider, M.; Kästner, M.; Reithmeier, E.
(2009):
Metrology and Charcterisation of Thermally Sprayed Coatings,
Proceedings of the 12th International Conference on Metrology and Properties of Engineering Surfaces, Rzeszow, Poland, 08.-10. July 2009, pp. 317 - 321
| File |
-
Denkena, B.; Möhring, H.-C.; Rosen, S.; Reithmeier, E.; Kästner, M.; Pahlke, A.
(2009):
Adaptronische Feinpositionierung - Lösungsansatz zur Produktivitätssteigerung,
VDI-Tagung "Automation 2009", 16.-17. Juni 2009, Baden-Baden, VDI Berichte, S. 353 - 356
| File |
-
Gillhaus, R.; Immel, J.; Kästner, M.; Reithmeier, E.; Denkena, B.
(2009):
Vier-Freiheitsgrad Feinpositioniersystem zur Ausrichtung von präzisionsgeschmiedeten Ritzelwellen,
VDI-Tagung "Automation 2009", 16.-17. Juni 2009, Baden-Baden, VDI Berichte Nr. 2067, S. 335 - 338
| File |
-
Gillhaus, R.; Kästner, M.; Haskamp, K.; Abo-Namous, O.; Reithmeier, E.
(2009):
Analysis of Unbalances of Crank Shafts using Geometric Data,
Proceedings of the euspen 9th International Conference, San Sebastian, 02.-05. June 2009, Volume 2, S. 287 - 290
| File |
-
Hao, Q.; Karpinska A.; Kaestner, M.; Reithmeier, E.
(2009):
Precise calculation of wear based on comparison of initial and worn surface topographies,
Proceedings of the 12th International Conference on Metrology and Properties of Engineering Surfaces, Rzeszow, 2009, pp.329-333
| File |
-
Hao, Q.; Kästner, M.; Reithmeier, E.
(2009):
Charakterisierung der Si-Partikelhöhen auf einer gelaufenen Alusil-Zylinderlaufbahnoberfläche mittels eines konfokalen Weißlichtmikroskops,
Dritter Workshop Optische Technologien, 2009, Hannover, pp. 190-196
-
Haskamp, K.; Kästner, M.; Reithmeier, E.
(2009):
A Virtual Telecentric Fringe Projection System,
Proceedings of the Fringe 6th International Workshop on Advanced Optical Metrology, Stuttgart, 14.-16. September 2009, S. 576-579
| File |
-
Kästner, M.; Gillhaus, R.; Reithmeier, E.
(2009):
Geometry Inspection of Precision-Forged Crank Shafts Based on Optical Multisensor Techniques,
Coordinate Metrology Systems Conference (CMSC) 2009 – Louisville, Kentucky, USA
| File |
-
Pahlke, A.; Rosen S.; Kästner, M.; Möhring, H.-C.; Reithmeier, E.; Denkena, B.
(2009):
Adaptronic Precision Positioning Technology,
ASME IDETC/CIE 2009 Proceedings, August 30 - September 2, 2009, San Diego, California, USA, Paper: DETC2009-86658
| File |
-
Abo-Namous, O,; Kästner, M.; Reithmeier, E.
(2008):
Generierung optisch kooperativer Oberflächen für die Streifenprojektion,
Zweiter Workshop Optische Technologien, S. 175 - 177, Hannover, 17 November 2008
| File |
-
Abo-Namous, O.; Seewig, J.; Kästner, M.; Reithmeier, E.
(2008):
Fast method to measure optical cooperativity,
109. Tagung der Deutschen Gesellschaft für angewandte Optik, Esslingen am Neckar, DGaO-Proceedings, ISSN: 1614-8436, 2008
| File |
-
Gillhaus, R.; Kästner, M.; Reithmeier, E.
(2008):
Optische Messsysteme zur Geometrieerfassung präzisionsgeschmiedeter Bauteile,
Zweiter Workshop Optische Technologien, S. 164-166, Hannover, 17 November 2008
| File |
-
Gillhaus, R.; Kästner, M.; Seewig, J.; Reithmeier, E.
(2008):
Sensorintegration zur Feinpositionierung von präzisionsgeschmiedeten Bauteilen,
VDI-Tagung "Sensoren und Messsysteme 2008", 10-12.03.2008, Ludwigsburg, VDI Berichte 2011, S. 841-850, 2008
| File |
-
Gillhaus, R.; Kästner, M.; Seewig, J.; Reithmeier, E.
(2008):
3D-Data Aquisition, Processing and Analysis of Gear Shaft Measurements Using Optical Sensors,
Coordinate Measuring Technique 2008, Bielsko-Biela, Poland, pp. 270-278, 2008
| File |
-
Kästner, M.; Gillhaus, R.; Reithmeier, E.
(2008):
Optical Measurement Techniques for Precision-forged High-performance Pinion Shafts,
7th International CTI Symposium: Innovative Automative Transmissions, Volume 2, pp. 693-712, Berlin, 3 December 2008
| File |
-
Kästner, M.; Gillhaus, R.; Seewig, J.; Reithmeier, E.
(2007):
Optische Multisensortechnik zur Geometrieerfassung präzisionsgeschmiedeter Bauteile,
VDI-Tagung „Optische Messtechnik technischer Oberflächen in der Praxis“, 09.-10.10.2007, Hannover, VDI-Berichte 1996, S. 89-100, 2007
| File |
-
Kästner, M.; Seewig, J.; Frankowski, G.; Reithmeier, E.
(2007):
Optical 3D Digitization and Coordinate Measurement of Parts by Means of DLP Based Projected Fringe Measuring Technology,
Coordinate Metrology Systems Conference 2007 – Reno, USA
| File |
-
Kästner, M.; Böttner, T.; Seewig, J.; Reithmeier, E.
(2006):
Messunsicherheitsbetrachtungen bei der Streifenprojektionstechnik,
VDI-Tagung "Messunsicherheit praxisgerecht bestimmen", 11/2006, S. 69-78
| File |
-
Kästner, M.; Meeß, K.; Seewig, J.; Reithmeier,
(2006):
Vergleiche der Streifenproduktionstechnik mit taktilen Methoden - Geometrieprüfung von Zahnrädern,
Dimensionale - Optische Messtechnik, S. 18 - 19
-
Böttner, T.; Kästner, M.
(2005):
The Virtual Fringe Projection System (VFPS) and Neural Networks,
Fringe 05, 5th International Workshop on Automatic Processing of Fringe Patterns, Erschienen im Konferenzband, S. 191 - 194, 2005
| File |
-
Kästner, M.; Krause, C.; Seewig, J.; Reithmeier, E.; Bach, Fr.-W.
(2005):
Optische Verzugsmessung bei der integrierten Wärmebehandlung präzisionsgeschmiedeter Bauteile,
OWT 05+WTK, 29.-30.09.2005, Chemnitz, Tagungsband, pp.358-365
| File |
-
Kästner, M.; Meeß, K.; Seewig, J.; Reithmeier, E.
(2005):
Optische Geometrieerfassung von Zahnrädern,
Verzahnungsmesstechnik, 14.-15.06.2005, Stuttgart, VDI-Berichte 1880, 155-163
| File |
-
Kästner, M.; Seewig, J.; Reithmeier, E.
(2005):
Calibration of an Optical 3D Triangulation Sensor for the Evaluation of Precision-Forged Gearwheels,
ISMTII, 06.-08.09.2005, Huddersfield, Journal of Physics: Conference Series
| File |
-
Meeß, K.; Kästner, M.; Böttner, T.; Seewig, J.
(2004):
Use of Fringe Projection in the Testing of Precision-Forged Gearwheels,
8th International Symposium on Measurement and Quality Control in Production, 12. - 15.October 2004, Erlangen, VDI-Berichte 1860, S. 427 - 436
| File |
